Показать скрытый текст
Specifications GSM Fixed Wireless Terminal
gsm intelligent alarm system,alarm system,alarm, home alarm system,Wireless Landline Auto-dial Alarm System,security systems,hom
gsm fixed wireless terminal
GSM-host01 is a GSM to Analog Converter(single port,insert 1 sim card only), the device can produce a FXS line to allow a regular phone to be connected and used just like a local landline(PSTN) except your calls will go out the GSM network. This device can both receive and make calls.
The main application is: Connecting the RJ-11 FXS line to connect Ordinary telephone set for voice call, to connect PBX for call extentions, to connect billing systems for public phone use, to connect VoIP gateway to realize VoIP call termination, to connect alarm system for security purpose, etc. It is not a VOIP gateway, nor a GSM+VOIP gateway, It is a GSM Fixed Wireless Terminal that produces a Analog FXS phone line
Appearance and Structure
Power Switch: Rocker switch
Power Socke: 12V DC input
Phone interface: 2 RJ-11 ports
Antenna interface: SMA-female
LED display: No.1: Power, No.2.in use, No.3, in talk, No.4, Battery, if have, No. 5-7, Signal strength
Front side: LEDs display for Signal strength, Power, Working Status,Talking and Battery indicator;
Rear side: 1pcs SMA antenna connectors, 2 RJ-11 output,Power port and switch;
Bottom side: 1pcs Sim card holder slots, you can insert Sim card into the slot .
1) It is a 1 channel GSM Gateway which has 2 RJ-11 outputs for extensions;
2) It can connect with ordinary telephone set, PBX , VOIP Gateway, Billing meter etc. ;
3) Dialing tone frequency:450hz;4
4) ) SIM card supported (1.8V, 3V);
5) DTMF Dialing;
6) The RJ-11 socket which connect the phone or billing system for metering purpose;
7) IP Presetting;
8) Working status and Signal Strength by LED indicator;
9) back up Li-ion battery( Optional) 7.2V 1300mAh.standby 24hrs,talking time: 2.5hrs.
AC-Adapter interface: Input: AC 110~240VAC 50~60Hz
Output: 12DC 1A.
4, Operation Circumstance:
Operation temperature: -10c~60C
Environment noise: <60DB
Antenna Amplifying: >2.5db
Dialing frequency: 450Hz
Hanging voltage: 45V
Picking current: 30mA/41mA
Ac- adapter: 1pcs
G.W: 0.75kg per unit. 20pcs/CTN, 16kg /CTN,CTN Size: 55cmX34.5cmX32.5cm
6, Function Setting
Before you do the following function settings, Lift handset or press hands free key of telephone set, then you can press the buttons according to the following instructions to finish setting, you will hear 2 beeps when you finish, this testify setting successfully.
1) Restore to factory default setting
*#99#99# restore to factory default setting.
2) Adjust dial interval
3) Adjust Earphone Volume
*#02#15# 02--command，15--volume，Max 16，Min 1, default setting is 15.
4) Adjust Mic. Volume (sensitivity)
*#03#10# 03--command，10--amount，Max 16，Min 1, default setting is 10.
5) Setting local area code
*#04#*0755# 10--command，*0755—area code，Max 5 numbers, use "*" instead if area code is less than 5 digits.
6) Setting IP numbers
*#05#17911# 05--command，17911—IP numbers，Max 5 numbers, use "*" instead if IP number is less than 5 digit.